Operation: User friendly. Only from start-stop button & digital potentiometer. Operator Setting: All settings using digital potentiometer & push button. Diagnostic Message: Up to 100 messages with date and time of day can be displayed. Operating Memory: The last 100 operator actions with date and time of day can be called up. Digital Measurement: Digital readout for frequency, power, current, duty cycle, speed, temp. etc. Automatie Adjustment: Automatie adjustment of power incase of mismatch. Early Warning System: Prevents production interrupt e.g. by bearing over temperature. Web Break Monitor: With programmable cut-of speed (m/min., f/min.) to inhibit production below the speed. Power Limit: Min. and max. power limit setting available. Roll Speed: Rotation control can be switched ON and OFF and shut down speed is adjustable. Alarm: Configurable digital output for different alarms. Auto Test Mode: Generator seif test without station to check hardware Auto Re-start: When discharge is on and electrode assembly is open, it will show message:"Electrode opeh "Automatie restart". This will restart automatically when it gets closed within set time. Emergency: Emergency, it will not allow any function to start. Ozone Extraction: lnterlock to prevent system to start without ozone blower in healthy condition.
Optional Features Proportional Power Control: Generator power control automatically proportional to machine speed. Available adjustable min./max. power limit for feature. Proportional(A WDC): Constant dose (Wmin / m2) control over the min. to max. speed. DCR Control Wet Restart: Range of intermittent is available to work for even discharge Wet Restart: Adjustable automatic restart incase of wet conditions.
Technical Specifications
Operating Voltage
3 x 380 / 400 / 415 / 400 / 460 v 50 / 60 Hz without neutral.
Power Capacity
8 kW, 9 kW, 10 kW, 12 kW
Operating Frequency
15 - 50 kHz
Generator Size
760 x 600 x 350 mm.
Display
4 lines multi-functional LCD display
Internal Control
Using 16 bit Fugitsu controller
Output Stage
Double bridge IGBT
Programming
Programming & setting using PC using RS 232 connection