Infrared wide band sensor PoE FR 61

Product information

  • Infrared wide band sensor with large measuring range of 160 mm, 320 mm or 480 mm
  • Electronic web offset in the sensor field of view without manual adjustment of the sensor
  • Scanning of homogeneous materials such as paper, non-woven fabrics, woven or knitted fabrics up to a transparency of 70%
  • Simultaneous evaluation of up to four edges
  • Insensitive to soiling due to integrated exposure controller and incident light compensation
  • Stable operating point independent of the material transparency
  • Optionally with air purge system for extreme dust conditions
  • PoE interface to the data network center
Measuring range±80 / ±160 / ±240 mm
Fork width FW40 / 100 mm
Resolution0.01 mm


Linearity
FW: 40+/-0.3 mm (+/-0.4 mm at 480 mm)
FW: 100+/-0.4 mm (+/-0.5 mm at 480 mm)
Reproducibility±0.1 mm
Wavelength 850 nm
Scanning rate500 Hz (≤ 2ms)
Evaluation, edge numberMax. 4 edges (2 webs)
Operating voltage nominal value | nominal range24 V DC | 20 to 30 V DC (ripple included)
Interface FR 62Sensor CAN
Interface FR 61Ethernet PoE (Power over Ethernet)
FieldbusesEthernet UDP, Ethernet IP (in preparation)
Electrical connectionM 8 socket connector 6-pin (Sensor CAN)
M 8 socket connector 4-pin (Ethernet PoE)
Air purge system operating pressure2 bar
Air purge system air consumption1.55 m³/h (at 2 bar)
Service unit filter5 µm
Service unit residual oil content< 0.01 mg / m³
Pneumatic connectionPlastic hose, outer diameter
6 mm externally calibrated
Ambient temperature +10 °C to +50 °C
Temperature drift ≤ ±0.1 mm/10 K
Storage temperature-10 °C to +80 °C
Relative humidity15 to 95 % (non-condensing)
Protection classIP 54
CertificationCE conformity
± 80 mm FW 40 mm226 x 115 x 32 mm
Measuring range | Dimensions (L x W x H) ± 160 mm FW 40 mm386 x 115 x 32 mm
± 240 mm FW 40 mm546 x 115 x 32 mm
± 80 mm FW 104 mm226 x 175 x 32 mm
± 160 mm FW 100 mm386 x 175 x 32 mm
± 240 mm FW 100 mm546 x 175 x 32 mm


Selection table
Type with PoEType with Sensor CANMeasuring range (mm)Fork width (mm)Blowing
FR 6101FR 6201160 (+/-80)40With
FR 6102FR 6202320 (+/-160)40With
FR 6103FR 6203480 (+/-240)40With
FR 6105FR 6205160 (+/-80)100With
FR 6106FR 6206320 (+/-160)100With
FR 6107FR 6207480 (+/-240)100With
FR 6111FR 6211160 (+/-80)40Without
FR 6112FR 6212320 (+/-160)40Without
FR 6113FR 6213480 (+/-240)40Without
FR 6115FR 6215160 (+/-80)100Without
FR 6116FR 6216320 (+/-160)100Without
FR 6117FR 6217480 (+/-240)100Without

Request available downloads

We will immediately send you all available documents for the components and systems.

*Required field

Order & offer

Spare parts & accessories

Contact

Write to us! We are looking forward to your message.

Salutation
*Required field